How to Use and Troubleshoot Your Radar Device

Powering On and Pairing Devices

When using the LETWESAF Camping Radar Security Alarm for the first time, charge both the detector and receiver. Press and hold the detector's power button until the blue indicator light flashes, then press the pairing button on the receiver. The devices will automatically enter pairing mode. The LED lights on the devices will indicate successful pairing.

How to Set Detection Range

The LETWESAF Camping Radar Security Alarm offers flexible detection range settings. Press the channel number button on the detector to adjust the detection range from the default 17 feet to a maximum of 50 feet. For custom range settings, follow the steps in the manual to ensure the system accurately covers your required area.

How to Enter Mute Mode

To disable audible alerts, press the mute button on the receiver. The device will then only flash its indicator light without emitting any sounds, making it suitable for environments requiring silent monitoring.

Common Issues and Maintenance

      Low Battery: If the battery is low, the device's LED will glow red. Recharge it to continue use.

      Signal Loss: If the detector fails to transmit signals for an extended period, the receiver's indicator light will flash red, indicating signal loss. Check if the device is functioning normally.

For unresolved issues, refer to the device manual or contact LETWESAF customer support to ensure your device remains in optimal working condition.

📧 Contact Us: If you need further assistance, please email us at support@letwesaf.com.